Universal Valve Spring Remover/Installer
Description
Universal Valve Spring Remover/Installer
Brand new and good quality Forged Steel construction.
Ideal kit for commercial or home hobbyist use.
Ideal solution for removal and installation of valve spring and valve stem seals from various vehicles engines, without the need for removing the cylinder head.
Inlet/Exhaust Valves are held closed by pressurizing the combustion chamber.
Suitable for most domestic and imported vehicles.
Application for various petrol or diesel engines for makes like: Audi, BMW, GM, Ford, Honda, Mazda, Nissan, Toyota, VW, Mitsubishi and many other makes.
Common applications for motor vehicles and machinery.
Supplied in plastic storage case, more convenient to carry and store.
Contains:
1pc Air line hose with Quick release air fittings (nitto type 1/4"BSP), adjustable air regulator with pressure gauge (150psi, 1Mpa), 420mmL
1pc Flexi Air line hose for Spark Plug hole M12 x 1.25 Male End - 1/4"BSP with M17 6 Point Female End, (315mmL)
1pc Flexi Air line hose for Spark Plug hole M14 x 1.25 and M18 x 1.75 Male End - 1/4"BSP with M17 6 Point Female End, (320mmL)
1pc Rigid Air Tube for Spark Plug hole M14 x 1.5 Male End - 1/4"BSP 17mm 6 Point Female End. (245mmL)
1pc Nitto Type 1/4"BSP male fitting for interchanging on Flexi hose and Rigid Tube.
5pc Valve Spring Retainer adapters:
-- 1pc 20mm diameter (53mmL)
-- 1pc 22mm diameter (71mmL)
-- 1pc 24mm diameter (63mmL)
-- 1pc 26mm diameter (50mmL)
-- 1pc 30mm diameter (50mmL)
3pc Valve Retainer Threaded Press Rods with ball retainer and trust roller bearing (12 diameter retainer end):
-- 1pc M12 x 1.75, M8 6 Point Hex End (66mmL)
-- 1pc M12 x 1.75, M8 6 Point Hex End (95mmL)
-- 1pc M12 x 1.75, M8 6 Point Hex End (136mmL)
12pc Head mounting hardware
-- 2pc Head mounting Step-up blocks 36mmL (50mmL Total)
-- 2pc head mounting bolts M8 x 1.25 (76mmL)
-- 2pc head mounting bolts M7 x 1 (70mmL)
-- 1pc head mounting (2) slotted cross bar 100mm x 22mm x 16mm, slot range 33mm to 87mm, center shaft mounting pin 13mm diameter with lock bolt.
-- 1pc head mounting Center Shaft 20mm Diameter with 13mm diameter mounting pin (90mmL)
-- 1pc head mounting Center Shaft 20mm Diameter with 13mm diameter mounting pin (122mmL)
-- 1pc head mounting Adjustable Slotted Arm with 20mm Diameter Shaft clamp mounting, 56mm Slot (120mmL)
-- 1pc head mounting Adjustable Slotted Arm with 20mm Diameter Shaft clamp mounting, 102mm Slot (165mmL)
-- 1pc head mounting Adjustable Pivot Ball Head with M12 x 1.75 Thread
WEIGHT: 4.34Kgs
SIZE: 46cm x 27.5cm x 8cm
PICTURED Items may vary...
Note: Sizes are approx only, slight variations may occur.